关于THESEUS‑FE的出版物

Contra Vision bus window wraps - HVAC case study using THESEUS-FE [english, 0.8 MB]
Contra Vision
Contra Vision
November, 2019

Comparative comfort simulations for winter load cases using global and local comfort models [english, 4.0 MB]
S. Paulke
P+Z Engineering
Haus der Technik, 3. Tagung 'Fahrzeugklimatisierung' | May 07-08, 2019 | Essen, Germany

Einfluss der regionalen Solarstrahlung auf den Pkw [german, 0.3 MB]
M. Westerloh, J. Köhler
Volkswagen AG, TU Braunschweig
18. SIMVEC 2016 | November 22, 2016

Adhesive Simulation and Measurements [english, 2.2 MB]
S. Paulke
P+Z Engineering
January 15, 2019

Thermal Simulations with THESEUS-FE and ANSA: Optimizing Thermal Comfort in an Office Building Environment [english, 1.3 MB]
D. Köster
P+Z Engineering
6th BETA-CAE International Conference | June 10-12, 2015 | Thessaloniki, Greece

Thermal Simulations of a Volkswagen e-Golf Cabin Incorporating Human Thermal Comfort Models [english, 3.3 MB]
S. Paulke, D. Köster, R. Hass, V. Bader, S. Menzel, A. Gubalke
P+Z Engineering, Volkswagen AG
17. SIMVEC 2014 | November 18-19, 2014 | Baden-Baden, Germany

Thermische Simulationen einer Volkswagen e-Golf-Fahrzeugkabine unter Einbezug von thermischen Menschmodellen [german, 3.1 MB]
S. Paulke, D. Köster, R. Hass, V. Bader, S. Menzel, A. Gubalke
P+Z Engineering, Volkswagen AG
17. SIMVEC 2014 | November 18-19, 2014 | Baden-Baden, Germany

Thermal simulation of a complete vehicle using manikin models [english, 3.3 MB]
S. Paulke, D. Köster, R. Hass, V. Bader, S. Menzel, A. Gubalke
P+Z Engineering, Volkswagen AG
17. SIMVEC 2014 | November 18-19, 2014 | Baden-Baden, Germany

Vehicle thermal safety with THESEUS-FE [english, 0.9 MB]
D. Köster
P+Z Engineering
Project Report | September 04, 2014

Numerical Simulation of the Air Flow and Thermal Comfort in Aircraft Cabins [english, 0.3 MB]
M. Konstantinov, W. Lautenschlager, A. Shishkin, C. Wagner
DLR Göttingen
2014

Numerical Simulation of the Air Flow and Thermal Comfort in a Train Cabin [english, 1.3 MB]
M. Konstantinov, C. Wagner
TU Ilmenau, DLR Göttingen
2014

Rechnerische und probandengestützte Untersuchung des Einflusses der Kontaktwärmeübertragung in Fahrzeugsitzen auf die thermische Behaglichkeit [german, 5.7 MB]
RWTH Aachen
RWTH Aachen
Research Project | November 18, 2013

Examples of industrially relevant turbulent flow simulation with OpenFOAM [english, 10.5 MB]
M. Konstantinov, K. Weinman, W. P. Wu, T. Köthe, M. Fragner, R. Deiterding, C. Wagner
DLR Göttingen
Project Report | October 09, 2013

MAN Bus A37: HVAC Analysis & Benchmark with THESEUS-FE [english, 3.0 MB]
S. Paulke, F. Artmeier, K.-E. Yildirim, V. Bader, A. Gubner
P+Z Engineering, MAN Truck & Bus AG, Volkswagen AG, TU Munich
Project Report | August 19, 2013

Challenges in developing tools for the Digital Factory [english, 1.4 MB]
S. Paulke
P+Z Engineering
MAGNA-Conference on Enhanced Dip Painting Process by Simulation Tools | May 29, 2013 | St. Valentin, Austria

Digital Paint Process Simulation - E-Coating and Thermomechanic [english, 2.5 MB]
T. Haberland
Volkswagen AG
MAGNA-Conference on Enhanced Dip Painting Process by Simulation Tools | May 29, 2013 | St. Valentin, Austria

Numerical prediction of thermal panel distortion incorporating thermal material properties of 6016 aluminum alloy [english, 1.0 MB]
C. Albiez, M. Liewald, A. Görres, J. Regensburger
Uni Stuttgart, Audi AG
European Aluminium Congress 2011 | November 22, 2011

Individualisation of virtual thermal manikin models for predicting thermophysiological responses [english, 0.2 MB]
D. Wölki, C. van Treeck, Y. Zhang, S. Stratbücker, S. R. Bolineni, A. Holm
Fraunhofer IBP
June, 2011

Workshop: Thermal Manikin FIALA-FE (decoupled-modus) [english, 5.8 MB]
S. Paulke
P+Z Engineering
Workshop @ DLR | July 28, 2011 | Göttingen, Germany

Studies of the Thermal Comfort inside of the Passenger Compartment using the Numerical Simulation [english, 1.1 MB]
M. Ivanescu, C. Neacşu, I. Tabacu
University of Piteşti
Motors 2010 | October 7-9, 2010 | Kragujevac, Serbia

Skalen-adaptive Simulation thermischer Behaglichkeit in Innenräumen [german, 1.1 MB]
C. van Treeck, J. Frisch, S. R. Bolineni, S. Stratbücker, S. Paulke, I. Schweinfurth, R. Schwab, E. Rank, A. Holm
Fraunhofer IBP, TU Munich, P+Z Engineering
BauSim 2010 | September 22-24, 2010 | Vienna, Austria

Numerical Simulation of Car Cockpit Heating during Winter [english, 0.8 MB]
C. Neacşu, M. Ivanescu, I. Tabacu
SC Automobile Dacia SA, University of Piteşti
2010

The Human Thermal Comfort Evaluation inside the Passenger Compartment [english, 0.9 MB]
M. Ivanescu, C. Neacşu, S. Tabacu, I. Tabacu
University of Pitesti, SC Auto Chassis International
2010

Idealisierte energetisch-analytische Abbildungsmethode der Temperaturschichtung bei der passiven Aufheizung in der Fahrzeugkabine [german, 0.8 MB]
S. Wagner
P+Z Engineering
November 24, 2009

Idealisierte energetisch-analytische Abbildungsmethode der Temperaturschichtung bei der passiven Aufheizung in der Fahrzeugkabine [german, 0.5 MB]
S. Wagner
P+Z Engineering
6. Tagung PKW-Klimatisierung | November 24, 2009 | Munich, Germany

An Optimised Thermal Design and Development Process for Passenger Compartments of Vehicles [english, 1.4 MB]
P. J. Baker, M. D. Jenkins, S. Wagner, M. Ellinger
Flowmaster Limited, P+Z Engineering
EASC 2009 (European Automotive Simulation Conference) | July 06-07, 2009 | Munich, Germany

The Influence of the Glass Material on the Car Passengers Thermal Comfort [english, 2.1 MB]
C. Neacşu, M. Ivanescu, I. Tabacu
SC Auto Chassis International, University of Piteşti
2009

The Influence of the Solar Radiation on the Interior Temperature of the Car [english, 0.6 MB]
C. Neacşu, M. Ivanescu, I. Tabacu
SC Auto Chassis International, University of Piteşti
2009

Simulation & Komfort [german, 1.2 MB]
qpunkt
qpunkt
Lange Nacht der Forschung | November 08, 2008 | Graz, Austria

Thermal Comfort Design and Assessment of Vehicle Cabins with THESEUS-FE [english, 1.2 MB]
S. Paulke
P+Z Engineering
Haus der Technik Seminar | October 14, 2008 | Munich, Germany

Auslegung und Beurteilung des thermischen Raumklimas in Fahrzeugen mit der Software THESEUS-FE [german, 1.3 MB]
S. Paulke
P+Z Engineering
Haus der Technik Seminar | October 14, 2008 | Munich, Germany

Simulation der Fahrzeugklimatisierung mit lokaler Komfortbewertung [german, 6.0 MB]
S. Paulke, M. Ellinger, S. Wagner
P+Z Engineering
Thermomanagement im Automobil, CTI Forum | February 12-13, 2008 | Bonn, Germany

The Application of Thermal Simulation Techniques for Seat Comfort Optimizations [english, 0.6 MB]
S. Paulke, E. Kreppold
P+Z Engineering, BMW Group
2008

Modern Ray-Tracing Techniques Applied to Radiation Heat Transfer Analysis [english, 1.0 MB]
S. Paulke
P+Z Engineering
FEAOnline Tech. Conference | December 14, 2007 | Beijing, China

Air Conditioning Cabin Simulation with Local Comfort Rating of Passengers [english, 6.0 MB]
S. Paulke, M. Ellinger, S. Wagner
P+Z Engineering
2nd European Workshop on Mobile Air Conditioning and Auxiliary Systems | November 29-30, 2007 | Torino, Italy

Finite Element Based Implementation of Fiala's Thermal Manikin in THESEUS-FE [english, 1.6 MB]
S. Paulke
P+Z Engineering
VTMS 8 (Vehicle Thermal Management Systems Conference and Exhibition) | May 20-24, 2007 | Nottingham, UK

Implementation of an Effective Collision Detection Algorithm for View Factor Matrix Calculation [english, 4.3 MB]
Ö. Can, C. Bahtiyar, M. H. Ates
P+Z Engineering, TU Munich
Project Report | January 17, 2007

Some Considerations on Global and Local Thermal Comfort based on Fiala's Thermal Manikin in THESEUS-FE [english, 0.3 MB]
S. Paulke, S. Wagner
P+Z Engineering
6th EUROSIM Congress on Modelling and Simulation | September 9-13, 2007 | Ljubljana, Slovenia

Polyhedral Finite Elements [english, 0.3 MB]
K. Chittepu, S. Kooshapur, Z. Jozefik, M. Lambrecht, D. Franke
P+Z Engineering, TU Munich
Project Poster | 2007

Implementation of Polyhedral Finite Elements with application to heat transfer [english, 5.4 MB]
Z. Jozefik, K. Chittepu, S. Kooshapur
P+Z Engineering, TU Munich
Project Report | 2007

A real time numerical analysis of vehicle cool-down performance [english, 6.6 MB]
H.R. Shim, H. Pastohr
Hyundai Motor Company, P+Z Engineering
VTMS 8 (Vehicle Thermal Management Systems Conference and Exhibition) | May 20-24, 2007 | Nottingham, UK

Simulation of complex systems using Modelica and tool coupling [english, 0.6 MB]
R. Kossel, W. Tegethoff, M. Bodmann, N. Lemke
TLK-Thermo GmbH
September 04, 2006

Kleben im Karosseriebau. Prozess-Simulation. [german, 1.1 MB]
M. Eis, S. Paulke
BMW, P+Z Engineering
Paderborner Symposium Fügetechnik | November 29-30, 2006 | Paderborn, Germany

Adhesives in Car Body Development. Process Simulation. [english, 1.1 MB]
M. Eis, S. Paulke
BMW, P+Z Engineering
Paderborner Symposium Fügetechnik | November 29-30, 2006 | Paderborn, Germany

Numerische Berechnung des thermischen Komforts in einem Modell der PKW-Kabine [german, 0.1 MB]
M. Konstantinov, C. Wagner
TU Ilmenau, DLR Göttingen
STAB Mitteilung | 2014

Neue Software THESEUS-FE - Mit virtuellem Manikin zu mehr Komfort in der Flugzeugkabine [german, 1.2 MB]
CeBeNetwork Group
CeBeNetwork Group
Press Report | April, 2007

Modernes Thermomanagement am Beispiel der Innenraumklimatisierung [german, 0.7 MB]
T. Schneider, M. Ellinger, S. Paulke, S. Wagner, H. Pastohr
P+Z Engineering
Press Report | February, 2007

Virtueller Manikin hilft Klima auf die Sprünge [german, 0.8 MB]
R. Habig
P+Z Engineering
Press Report | February, 2006

New climatisation Manikin improves interior design [english, 0.5 MB]
P+Z Engineering
P+Z Engineering
Press Release | 2006

Softwareentwicklung ist Teil unserer Kundenorientierung [german, 0.1 MB]
Automotive Engineering Partners
Automotive Engineering Partners
Interview | 2006

Innovative concepts relating to air-conditioning and thermal comfort, for optimizing the range of electric vehicles (E-comfort) [english, 0.5 MB]
BmBF
BmBF
Press Announcement | 2011